SS-12t jumping-jet fountain nozzle

Like a laminar nozzle, the jumping jet nozzle forms water into a curved, crystal-clear rod. Its water-cutting technology and system create attractive, interrupted water arches of different lengths and sizes. Coloured light within the transparent water rod adds to its striking visual appeal. Installing these nozzles in groups and using a programmed control system to activate the jets at different intervals produces attractive group water dances throughout the day and night. Made of 316 stainless steel with a fully polished, attractive finish, this nozzle is suitable for indoor and outdoor use without a cover. Its stainless-steel base allows the water projection angle to be adjusted through 100 degrees, enabling both vertical and horizontal projection. Special professional filters inside these nozzles make the water clear and crystalline and eliminate turbulence. The control system uses the DMX/RDM protocol for programming and data transmission and is compatible with leading standard fountain software.

To obtain clear, crystal-like water in laminar and jumping-jet nozzles, water turbulence must be removed. GSO nozzles use professional cellulose filters for this purpose, allowing greater water cohesion and continuity. These filters are sensitive to suspended and solid matter such as algae, which necessitates frequent washing. To improve performance, suitable disc filters are therefore recommended at the pump outlet or nozzle inlets.

Specifications:

1. Outlet jet diameter as required: 10،12،14 mm
2. Material: 316 stainless steel
3. Can be used individually or in groups
4. Operation independent of the water level
5. Can be installed inside the fountain basin
6. Water jet height from 0.5 to 5.5 metres
7. Jet angle adjustable from -5 to 95 degrees
8. Requires installation of a disc filter
9. Uses the standard DMX/RDM protocol